1. Take plywood sheet of 12mm thickness. Draw boomerang contour pattern as shown in picture above. The 107 degree angle size is not critical, just optimum. It can be more or less than 107deg. Chord length near the center of boomerang = 80 mm, and 60 mm near tips. Make wing chord length few millimeters wider as is required, because it necessarily reduces during sanding process. Also make some access length at boomerang wings tips, as it possible, that you will have to cut them during tune proc...

A boomerang is usually thought of as a wooden device cut from a tree trunk, although historically boomerang-like devices have also been made from bones. Modern boomerangs used for sport are often made from carbon fiber-reinforced plastics or other high-tech materials. Boomerangs come in many shapes and sizes depending on their geographic or tribal origins and intended function.

An important distinction should be made between returning boomerangs and non-returning boomerangs. Returning boomeran...